Join to our channels: new products, coupons, best deals:
F4 FCs
Flywoo Goku GN405S BMI270 AIO 20A
Multirotors → FPV Racing drones → Flight controllers → F4 FCs → FC F4 AIO built-in ESC 4in1 → Flywoo Goku GN405S BMI270 AIO 20AMCU: | F405 |
Gyro: | BMI270 |
Barometer: | BMP280 |
OSD: | + |
Power : | 2-6S |
3.3V BEC: | 0.5A |
5V BEC: | 2A |
Current Sensor: | + |
ESC type: | built-in |
ESC: | 20A x 4 |
BLHeli: | BLHeli_S |
Receiver: | - |
UART Rx: | 6 |
UART Tx: | 6 |
Blackbox: | 8Mb |
Size: | 33.5 x 33.5mm |
Mount Holes: | 25.5 / 26.5mm |
Weight: | 8.5g |
FLYWOO new top GOKU series AIO are finally here! GOKU GN405 20A/40A FC is an economical and durable all-in-one AIO , which can meet most your FPV needs.
Use powerful F405 chip , integrate 5V BEC, barometer, black box, WS2812LED, support 6 complete hardware serial ports, I2C and other functions are all open.
Feature:
- F405 BGA MCU
- Barometer
- 5V BEC
- Black Box
- 20A/40A 8Bit ESC (Optional)
- 6 UARTS
- current sensor
- LED
Specifications:
- MCU: STM32F405 BGA
- IMU: BMI270(SPI)
- Barometer: BMP280
- Onboard LED:WS2812*4
- 6 hardware UARTS (UART1,2,3,4,5,6)
- Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
- PPM and PWM receivers are not supported.
- Onbord 8Mbytes for Blackbox logging
- 5V Power Out: 2.0A max
- 3.3V Power Out: 0.5A max
- Dimensions: 33.5x33.5mm
Mounting Holes: Standard 25.5/26.5mm square to center of holes
Weight: 8.5g - Support BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 - Input Voltage: 2-6S Lipo
- Continuous Current: 20A/40A (Optional)
- Firmware: BLHELI_S
Q&A :
1、 Betaflight Firmware target: FLYWOOF405S_AIO
2、GOKU GN405S 20A/40A AIO Wiring Diagram : ( LINK )
Share
Prices for Flywoo Goku GN405S BMI270 AIO 20A in stores
Deals found: 1 ()
See also
Flywoo Goku GN405S ICM42688 AIO 20A
$74
Flywoo Goku GN405S MPU6000 AIO 20A
$72
Flywoo Goku GN 405S BMI270 AIO 40A
$86
FC F4 AIO built-in ESC 4in1