ExpressLRS ELRS
Happymodel CrazyF4 ELRS-F4 2G4 AIO 5in1 Flight controller
Remote Controllers → Long Range Systems LRS → ExpressLRS ELRS → ExpressLRS ELRS 2.4Ghz → Happymodel CrazyF4 ELRS-F4 2G4 AIO 5in1 Flight controller![Happymodel CrazyF4 ELRS-F4 2G4 AIO 5in1 Flight controller Happymodel CrazyF4 ELRS-F4 2G4 AIO 5in1 Flight controller](https://cdn.shopify.com/s/files/1/3002/8962/products/6_cbe6aeaa-dcb5-4610-89b6-b4507fc8466a.jpg)
MCU: | F411 |
Gyro: | MPU6000 |
OSD: | + |
Power : | 1S |
5V BEC: | 1A |
ESC type: | built in |
ESC: | 4x 5A |
BLHeli: | BLHeli_S |
Receiver: | ExpressLRS 2.4GHz |
VTX: | 5.8GHz 200mW |
UART Rx: | 2 |
UART Tx: | 2 |
Buzzer pad: | 1 |
LED pad: | 1 |
USB: | Micro USB |
DJI compatible: | - |
Mount Holes: | whoop 29x29mm |
Happymodel ELRS F4 2G4 AIO 5in1 Flight controller built-in SPI 2.4GHz ELRS Receiver
Overview:
The world’s first AIO 5in1 F4 flight controller with integrated SPI 2.4GHz ExpressLRS receiver has been launched.The flight controller integrates SPI controlled 2.4GHz ExpressLRS receiver, Dshot protocol 4-in-1 ESC, 5.8GHz 40ch video transmitter and Betaflight OSD. Ultra-small size and ultra-stable remote control range can improve the range of the original SPI receiver. And because the 2.4GHz ExpressLRS receiver is equipped with the SX1280 radio frequency chip with high sensitivity, high packet rate and low latency, this flight controller is the one that all Race/Freestyle pilots needed. It is suitable for use in Tiny whoop Race or Toothpick Freestyle, and can also be used in 1S ultra-lightweight Nano Long Range platform.
Specifications:
Flight controller
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI ExpressLRS 2.4GHz receiverBuilt-in 5V 1A BECFlight controller firmware target: CRAZYBEEF4SX1280
Onboard 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHzAntenna : SMD antenna
Telemetry output Power: <12dBmReceiver protocol: SPI ExpressLRSCould bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module(need to flash the same version ELRS firmware)
Onboard 5.8g VTX
Output power: 25mw~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels(include Race band)Smartaudio ready
Onboard voltage and Amperage meters settings
Voltage meter scale setting 110
Amperage meter scale setting 1175
Bind procedure:
1.Power the flight controller by connecting USB. Please make sure that the port driver of the flight controller is correctly installed on the computer, then open Betaflight Configurator(Latest version) to connect, enter to the “receiver” interface, and then click “Bind Receiver”, the red LED at the bottom of the flight controller will flash quickly, which means that the SPI ELRS receiver enters the bind mode. There is another way to make the receiver enter the bind mode: after connecting to the Betaflight configurator, move to the CLI interface and enter “bind_rx” in the command line.
2.After correctly connecting the ES24TX or ES24TX Lite/Slim module or DIY 2.4G ELRS TX module to your Opentx radio transmitter, copy the latest version of ELRS.LUA file to the SD card in the remote controller. The directory is “SD Card/Scripts/tools”, Then run ELRS.LUA and upgrade the specified TX frimware through Wifi, and then click “bind” to link with the SPI ExpressLRS receiver. Note: You need to adjust the Packet Rate to 500Hz from the ELRS interface of your radio controller before binding.
3.After the binding is successful, the Red LED at the bottom of the flight controller will getting to be solid, and the telemetry can be received at the same time.
4.The meaning of the LED status of the SPI receiver: the LED is getting to be solid, indicating that the bind is successful or the connection and communication is normal, the LED flashing quickly indicates that the receiver is in binding mode, and the LED flashing slowly indicates that the there is no signal received from the radio controller.
Package Included:
1*AIO 5in1 Flight Controller build in Receiver
Since Betaflight has not yet released the official firmware that could supports the SPI Expresslrs protocol, the current version is the Beta version .
Betaflight will update it to their official target soon. Please feel free to contact with us if you have any issues with this Beta version Firmware
Firmware download: ELRS F4 2G4_Betaflight_4.3.0_STM32F411_1.0.0-RC5 and Diff Document
ExpressLRS TX firmware(which could bind with ELRS F4 2G4) download: ELRS F4 2G4 TX Firmware RC3
ELRS.LUA download: ELRSlua Latest
This is the correct interface of 2.4GHz TX module that could bind with ELRS F4 2G4 flight controller
This is the correct CLI configuration of SPI ExpressLRS receiver
Notes: Since Betaflight has not yet released the official firmware that could supports the SPI Expresslrs protocol, the current version is the Beta version(Target:CrazybeeF4SX1280). Betaflight will update to their official target soon. Please feel free to contact with us if you have any issues with this Beta version Firmware.
Prices for Happymodel CrazyF4 ELRS-F4 2G4 AIO 5in1 Flight controller in stores
Deals found: 48 (AliExpress6, MakerFire1)
Store | Stock level | Lot price | Shipping cost | Coupon / promocode | Pcs./lot | 1pc price |
AliExpress | High stock level | $58 | Discount at checkout | 1 | $58 | |
AliExpress | Stock level: 5 | $63 | 1 | $63 | ||
AliExpress | High stock level | $63 | 1 | $63 | ||
AliExpress | High stock level | $74 | 1 | $74 | ||
MakerFire | Preorder | $76 | 1 | $76 | ||
AliExpress | High stock level | $79 | + $2.42 | 1 | $81 | |
AliExpress | High stock level | $82 | 1 | $82 |
See also
![Happymodel CrazyF4 ELRS F4 900MHz AIO 5in1 Flight controller Happymodel CrazyF4 ELRS F4 900MHz AIO 5in1 Flight controller](/i/no-photo.jpg)
![ExpressLRS ELRS 2.4Ghz ExpressLRS ELRS 2.4Ghz](https://imgaz2.staticbg.com/thumb/large/oaupload/banggood/images/E5/90/941c628b-7bbc-442f-addc-54873a68de37.png)
![Flight controllers with ExpressLRS ELRS receiver Flight controllers with ExpressLRS ELRS receiver](https://ae01.alicdn.com/kf/H6a50b2ebde884fd786ded4dc5ecc5364x/HappyModel-ELRS-X1-AIO-4in1-Flight-Controller-Built-in-SPI-2-4G-ELRS-12A-ESC-for.jpg)
![Happymodel Mobula6 Parts Happymodel Mobula6 Parts](/i/no-photo-category.png)